Setup apple airport express with iphone4/27/2024 ![]() ![]() The base station password is set to "public" and the IP address is reset. The middle LED will blink once every second while the device is in soft reset mode. Hold down the reset button for 1 second.Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip. If you're using an AirPort Graphite or AirPort Snow (Dual Ethernet) base station, connect your computer directly to the base station using an Ethernet cable. You can then use AirPort Utility to reconfigure the base station. Wait about a minute for the base station to finish restarting.While holding down the reset button, connect the base station to power and continue to hold the reset button for about 6 seconds, until the status light on the base station flashes amber rapidly.Disconnect the base station from power.When AirPort Utility indicates that setup is complete, click Done.įactory-default reset, available only with firmware version 7.9.1 on AirPort Time Capsule 802.11ac and AirPort Extreme 802.11ac:. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |